Roline Cable/DSL Router Betriebsanweisung PDF herunterladen (Seite 41)

3.10 Static Routing

• Static Routing: Select the route entry number from 1 to 20 that you want to configure.

• Destination LAN IP: You can create a static route by entering the IP address of the remote host

or network. If you wish to build a route to the entire network, be sure to set the network portion of the IP

address to zero (0).

• Subnet Mask: The Subnet Mask determines which portion of an IP address is the network

portion, and which portion is the host portion.

• Default Gateway: Enter the address of the gateway device that allows for a contact between the

Router and the remote network or host.

• Hop Count: Enter the number of hops required between the LANs to be connected. The Hop

Count represents the “cost” of the routing transmission. The default value is 1.

• Routing Table: Click “Show Routing Table” to see update routing information.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 51 52

Keine Kommentare

Roline Cable/DSL Router Betriebsanweisung Seite 41